White sheen over items

[shar_N]

Hello,

Some items in a mod I am messing around with have a whitish sheen over the items. The armor itself is visible but there is an ugly whitish translucent layer all over everything, almost like it has been painted over with shiny wax. Does anyone know what this is and how to fix it? The item seems to have the correct normal, bump and spec textures applied to the materials when compared to other items in the BRF file, so what else could be the problem?

 

[Eärendil Ardamírë]

Make sure that you have material and texture entries at the brf file. If those two are at different brf files, make sure that the material gets loaded first, then the texture, then the mesh. OpenBRF has a Error Search function, you can make use of that one. If the problem still persists, make a screenshot of it and a screenshot of the material and the texture entry at the brf file.

 

[shar_N]

Make sure that you have material and texture entries at the brf file. If those two are at different brf files, make sure that the material gets loaded first, then the texture, then the mesh. OpenBRF has a Error Search function, you can make use of that one. If the problem still persists, make a screenshot of it and a screenshot of the material and the texture entry at the brf file.

These are what I see

 

[Eärendil Ardamírë]

It looks for me like it is very shiny and not white. At the material setting your Coefficient (Coeff) is at 24 which is relatively high, it determines the shinyness. Set it to 5 and take a look again.

 

[shar_N]

It looks for me like it is very shiny and not white. At the material setting your Coefficient (Coeff) is at 24 which is relatively high, it determines the shinyness. Set it to 5 and take a look again.

Seems to be unchanged. I tried bringing it even lower, then down to zero and nothing happens.

 

[Eärendil Ardamírë]

Hm, ok. Set all Spec RGB values to the same value, something between 5 and 12. And which shader are you using?

 

[shar_N]

Hm, ok. Set all Spec RGB values to the same value, something between 5 and 12. And which shader are you using?

specular_shader_skin_bump_high

EDIT: tried with the spec RBG values changed to 6, no effect

 

[Eärendil Ardamírë]

Does the error search function give you any results? Could perhaps be that you have two meshes with the same name or such.

 

[shar_N]

Does the error search function give you any results? Could perhaps be that you have two meshes with the same name or such.

Doesn't seem to be any error relating to the meshes when I search.

 

[Kentucky 『 ＨＥＩＧＵＩ 』 James]

That's the "missing texture" texture being used for the specular. Check where the .spec is in openbrf and make sure it's loaded before the material and mesh.

 

[Eärendil Ardamírë]

That's the "missing texture" texture being used for the specular. Check where the .spec is in openbrf and make sure it's loaded before the material and mesh.

I was thinking about that one too but the screenshots above show that they are all inside the same brf file.

 

[Eärendil Ardamírë]

Have you been able to solve your issue here?

 

[shar_N]

Have you been able to solve your issue here?

Hello, yes I did, sorry I forgot to post about it. I combed through the resource files manually and did end up finding a duplicate mesh and this solved the issue.