faradon
Count
So, here´s a little tutorial about making an axe for mount&blade (mainly a tutorial about the blade....)..hope you like it killop5 
At first, I highly recommend to use some concepts for modelling. It makes everything MUCH easier.
1.So, thats my concept for example:
2.A quick simple cylinder(12) (with some bevel etc..) is my handle
3.I skip the blabla here. Let´s start with the small side of blade. I created a box and formed it like that:
4.I extruded the selected poly in the pic above and moved the verts until I got a result that looks like that
5. Now I selected these edges:
and connected them 3 times and moved them
6.I selected these verts:
and I shaped the sharp part of the blade with them.
7.Then I changed the height of some of the verts to make the axe look better:
8.The small side is ok for now. Now I started with the big part of the blade. The steps are nearly the same as before, so I just post some pics now:
The sharp part of the axe is made in the same way as above
So, I´ve finished the half of the blade. I just have to mirror it:
There´s still one problem:
This is how I fixed it:
Well, that´s my way of making an axe blade and I don´t say it´s the best method
At first, I highly recommend to use some concepts for modelling. It makes everything MUCH easier.
1.So, thats my concept for example:
So, I´ve finished the half of the blade. I just have to mirror it:
There´s still one problem:
Well, that´s my way of making an axe blade and I don´t say it´s the best method
