Mount&Musket: Bug Reports and Technical Help

Users who are viewing this thread

Hi all! Well, because the music in my mm became so low to that point that you can barely hear it. I wanted to solve that problem and i went to video options and i can't remember if i ticked or pressed something, but the thing is that when i enter a server it's all of a sudden darker, and before i did anything it was bright. I checked my brightness and set it to maximum but the problem still won't go. So, my question is: How do I solve this?
 
Andronicus011 said:
Hi all! Well, because the music in my mm became so low to that point that you can barely hear it. I wanted to solve that problem and i went to video options and i can't remember if i ticked or pressed something, but the thing is that when i enter a server it's all of a sudden darker, and before i did anything it was bright. I checked my brightness and set it to maximum but the problem still won't go. So, my question is: How do I solve this?

Try disabling HDR by going to Options > Video Options > Turn HDR Mode to off.
 
Another thing. MM seems to be showing buildings from the native version and not from mm. How do I solve this? I have load textures on demand ticked.
EDIT: I can't hear the music, people firing or myself firing. I have this for like 2 or 3 days.
 
Andronicus011 said:
Another thing. MM seems to be showing buildings from the native version and not from mm. How do I solve this? I have load textures on demand ticked.

That's Inteded, M&M still makes use of native scene props.

EDIT: I can't hear the music, people firing or myself firing. I have this for like 2 or 3 days.

Options > General Tab and increase the Music/Sound volume by moving the slider to the right.

If you're using Windows 7 you can also check if you accidently muted Warband's sound by going to Start > Insert "Adjust system volume" in the search bar > Look for Mount & Blade Warband and increase the volume.
 
That's Inteded, M&M still makes use of native scene props.
Yeah, but i had some weird things like, instead of a wall there would be fur etc. I solved it.
If you're using Windows 7 you can also check if you accidently muted Warband's sound by going to Start > Insert "Adjust system volume" in the search bar > Look for Mount & Blade Warband and increase the volume.
Either I am stupid or I don't know how to follow instructions. When I enter Adjust system volume, it shows me this: Device Applications Steam. There is nothing else. Is there anything missing?
 
Either I am stupid or I don't know how to follow instructions. When I enter Adjust system volume, it shows me this: Device Applications Steam. There is nothing else. Is there anything missing?

Launch M&B Warband & minimize it > Go to "Adjust System Volume" > Use the scrolling bar at the bottom of the Window and look for M&B Warband to increase the volume.

Did you try increasing the volume from Warband's options as specified in my previous post?

I'm a bit sceptical that this will work tough; I'm merely using a Cavemen's approach to solve the issue since I have no idea what may be causing it.  :roll:
 
Whenever I try to boot into Mount & Musket (choose mm_russia3 from the launcher) I get the developer credits, then my game crashes. I can run Native fine. Wherever I look, people seem to be advising updating the latest version, citing it as 1.134, according to the launcher, my game is 1.142.

I got M&M to run briefly immediately after I installed it, but didn't try to play, as I felt familiarizing myself with the basic game would be wise, before trying M&M (I'm a total noob).

Does anyone know if M&M works with Warbands 1.142? If so, does anyone know what else could be causing this problem?
 
Hi all, i've been trying to get on the server for a while and while it seems everyone else can get on (currently 71 people are on it) I can get on it, then I instantly lose connection and can't find it again.

Anyone else having this issue, or had it and found a fix?
 
Hello, I am a new member to this forum but an experienced modder.  I recently downloaded and installed this mod for Mount and Blade: Warband (With Steam), everything is fine.  I try to install the patch and I get
w9bucl.png

I can't seem to figure out what this is and how to get it.
Although just using this mod without the patch works, only for custom battles.  When I try to start a campaign it will get to launching game of the loading screen and then the game just shuts down.  No error or anything...
Any help would be greatly appreciated!  Thanks!
 
FAQ said:
1. What is Mount&Musket - Battalion?

Mount&Musket - Battalion, commonly abbreviated to Mount&Musket or MM is a modification for Mount&Blade Warband. It is currently Multiplayer only, but includes custom battle and there might be Singleplayer in the future (don’t make suggestions about it).
 
I need help, every time i join i game somebody kicks me? why? by the way I have v1.143, does that have anything to do with it? Do I need With Fire & Sword? And sometimes I get an error.
 
Whenever I try to get on Mount&Musket multiplayer or any other Mount&Blade multiplayer, I click to connect to one of the servers and it says," This server is running a module that is not installed in your computer. Would you like to visit the download site for this module now?"
I click yes but the window doesn't pop up for the site. What should I do?
 
Back
Top Bottom