Resolved Huge graphic bug

[Marcidy]

Yes. Sometimes they are barely visible and sometimes they are very noticeable.

 

[MArdA TaleWorlds]

Both ingame and in the AMD control center the anisotropic filtering is set to 8x.

Can you change the setting on the AMD control centre to use the application's settings? IF AMD app forces its setting the game can't function properly.

 

[Marcidy]

There is no setting for anisotropic filtering to use the application's settings in AMD control centre. Such settings only exist for Vertical Refresh, Anti-Aliasing and Tessellation Mode. All 3 are set to use the game's settings for me.

 

[MArdA TaleWorlds]

Is this the same app you are using as well?

 

[Marcidy]

No, Im using this: https://ibb.co/kMDghLN

 

[MArdA TaleWorlds]

Can you check the advanced bar on the bottom? There should be the related setting.

 

[Marcidy]

Yes, but as I said there is no option for it to use the game's settings: https://ibb.co/hMJZ1jx

 

[MArdA TaleWorlds]

You should click on the Enabled button under the anisotropic filtering to disable the override.

 

[Marcidy]

Did just that now and it works!!! The grid no longer appears on the map/characters. Also as I can see the equipments are fine too.
Thank you so much for your help!

 

[Arthonas]

Marcidy Can you repeat to me what are you did pls

 

[Marcidy]

Yes. if you have the Catalyst control centre make sure that the following settings are set: (highlighted ones)
if you have the one that I use do the following: set antisotropic Filtering "Disabled"
the following picture could help you find that setting: https://ibb.co/hMJZ1jx (here disable Antisotropic FIltering, also make sure that these settings apply to the game not just in general)
if you did the settings while the game was open, then close it and launch it again.

 

[Arthonas]

Yes it works Thanks you so much

 

[Arthonas]

But the quality is bad. Is there a way to improve it without to go back?

 

[Marcidy]

Try to change ingame settings. You can also enable anisotropic ingame, it wont cause the grid to appear.

 

[Arthonas]

The ingame settings change nothing.
But you, How are your graphism?

 

[Marcidy]

For me its the same, just without the grid. Its good.

 

[Arthonas]

Everythings were ok before today. But today, the quality is so bad.The graphism ingame are maximum. My drivers is up to date.

 

[Marcidy]

In the radeon control center try to turn everything to "use the applcation's settings". Or turn everything off. My graphics turned better when I turned off "image sharpening".

 

[Arthonas]

What do you have in global radeon center settings?

 

[Marcidy]

I set everything to "Use application's setting" where I could. Where I couldnot set that, I disabled those options.