Ein Problem bei Mount and Blade: Napoleonic Wars

Users who are viewing this thread

Banii

Recruit
Hallöchen an alle Interessenten,

kurze Vorgeschichte:

Über einen sehr guten Kumpel kam ich zu Mount and Blade.
Nach dem er es sich auf einer Game-CD in einer Saturnfiliale gekauft hatte und schon eine ganze Weile  gespielt hatte, haben wir und dazu entschlossen, es auch mir zu kaufen. Allerdings war zu dieser Zeit Mount and Blade: Warband und Mount and Blade: Napoleonic Wars bei Steam runtergesetzt (also billiger) und wir haben mir eine Paysafe-Card besorgt. Zuhause angekommen sofort den Rechner angeschmissen und dann wollte ich mir es kaufen. Leider hat da die Steamseite nicht das gemacht, was es sollte und wir haben das Spiel über den Acount von meinem Kumpel gekauft und mir als "Geschenk" geschickt. ...Das hat komischer Weise funktioniert...

So. Ich hab die beiden Sachen dann auch bekommten und installiert. Mount and Blade: Warband funktioniert nur im Einzelspielermodus. So wie in Native als auch bei Floris expanded Mod Pack.
Und da es bei Napoleonic Wars nur Mehrspielermodus gibt funktioniert das auch nicht.


Das genaue Problem ist das:

Wenn mein Kumpel "Multiplayer" und dann "Server beitreten" macht dann werden bei ihm die Serverinformationen sehr schnell (in max. 5 Sec.) geladen, bzw. eingholt, wie es dort steht, und ziemlich viele Server werden gefunden und angezeigt.
Wenn ich allerdings das selbe mache werden die Serverinformationen garnicht erst eingeholt. Die Zahl daneben fängt immer zwischen 970 und 940 an und verändert sich nie.

Könnte es damit zusammen hängen das er mir es als Geschenk geschickt hat?  Doch das könnte ich mir nur sehr schwer vorstellen.. Und an meiner Internetverbindung liegt es definitiv nicht. So viel steht fest. Denn der Rooter ist keine 2 Meter von meinem PC entfernt und Internet hab ich ich "super"-starke Verbindung.

Würde mich auch mal interessieren bei wem, bzw. bei wie vielen der Fehler auch auftritt.
Und WENN, wie ihr das Problem gelöst habt.

Hoffe mir kann jemand ein Tipps geben die mir weiterhelfen können.
Danke jetzt schon einmal.
LG Banii  :wink:
 
Ich könnte mich nicht an eine Windowsmeldung errinnern.

Was sollte ich denn mal ausprobieren damit ich weiß ob meine Firewall den Internetzugang blockiert?
Sie direkt komplett ausschalten?

Ich glaube ich habe Mount and Blade: Napoleonic Wars auch schon mal neu installiert...
 
Einfach mal über die Systemsteuerung in die Windows-Firewall Zulassung reinsehen.
Wenn bei M&B kein Häkchen ist, einfach eins dran machen.
Der Weg dahin kommt im übrigen auf dein Betriebssystem an, ich gehe mal davon aus das du es selbst findest.
 
Damit wären meine guten Tipps auch schon aufgebraucht, ich hatte bisher nie irgendwelche Probleme.
Vielleicht findet sich ja jemand mit mehr Erfahrung was Technische Probleme angeht
 
Danke erst einmal an dich IceNoVa.

Meinst du die Produktschlüssel, die angezeigt  werden wenn man im Spiel Shift + Tab drück?
Wenn ja, dann nein. Ich musste sie noch nie eingeben.
 
Komisch, als ich mir NW gekauft habe musste ich den Code eingeben als ich auf Multiplayer geklickt habe.
 
Es ist total beknackt! Mitlerweile habe ich das Spiel auch an andere Kumpels weiterempfolen und bei denen heißt es nach der Schule immer: "kommt lasst dann Mount and Blade zusammen zocken."

Echt verdammt schade das es bei mir nicht funktioniert.
Und ich binda ja auch nicht so erfahren drin, in Sachen Probleme beheben.
Bei mir entszehen die Probleme immer nur...
 
Könnte es sein, dass dein Router die Ports blockiert?

Ansonsten könnte das hier helfen:
superhit1000 said:
This is a thread full of possible solutions to the Multiplayer server not populating.The developers are working hard on fixing this issue, but for now we have to rely on user made fixes to help the bug. Now these solutions may or may not work for you, they work for some people but not all.

Solution 1
1) from command line digit netsh winsock reset

2) Restart PC

3) Start M&B warband and enjoy multiplayer!

Submitted by Tanfata

Solution 2
1) Go to your routers setup page.

2)Uncheck both block IP flooding and block anonymous connections options

3) Start M&B Warband Multiplayer.

Submitted by Manatic

Solution 3
1.Launch game as usually go to the point where you get ''stuck'' (retrieving server list.. or connecting to a server)

2.wait few secs than press ALT+TAB  go to start log off and switch user

3.Log back in in your account go back to game and what a surprise it WORKS

Submitted by Perkunas

Solution 4
1) Find the RGL_config.txt in your Warband Folder and Open it.

2) Find the max_number_of_connections and change the value from 64 to 20 or so.

3) Save and Start Warband

Submitted by the Developers

Solution 5
1) Find the RGL_config.txt in your warband Folder and Open it.

2) Find the use_secure_connection = 1 and change it to 0.

3) If it's already 0 change it to 1

4) Save and Start Warband.

Submitted by the Developers

Solution 6
1) Go into Multiplayer.

2) Host your own game and start Map and spawn.

3) Quit and press start search.


Submitted by TreeBeard

If all else fails
1) Close down any apps accessing the internet.
2) Start Warband windowed and go to the MP page where you can click 'Join a server'.
3) Start Wireshark.
4) On Window 7 my wireless adaptor is listed a simply "Microsoft", so Start capture on interface: Microsoft (On XP I think it listed the adaptor type)
5) Click on Join a server.
You will see a load of coloured entries showing up on the Wireshark screen, this process normally completes in a few seconds.
6) Click Capture, Stop. File, Saveas, etc.
You could zip and attach whole log to the bug report, its not very big or look for the "GET /handlerservers.ashx?" one Daegoth requested, right-click and select 'Follow TCP Stream'.

Props to Nood
One of the Dev's requested for you to do this and after doing so please post the results at the bug tracker which is located below.

Here is the bug tracker for this bug: http://bugs.taleworlds.com/edit_bug.aspx?id=1758

If you have a solution and it's currently not in here or if a solution has solved your problem please post here.
Updates
Add a Step by Step instructions for Wireshark​
 
Danke erstmal :smile:

Ich würde ja gern mal die Produnktschlüssel eingeben, aber ich weiß nicht wo...
 
Bitte! :wink:

Ich habe folgendes gefunden:
Rigadoon said:
If your Napoleonic Wars isn't detected by the installer, just follow this procedure to get it working.

  • Press Windows + R
  • Type regedit
  • Head to HKCU - HKEY Current user
  • Open the software folder
  • Head to MountAndBladeWarbandKeys
  • Right click on MoutnAndBladeWarbandKeys
  • Click on New String Value
  • Enter serial_key_nw as name
  • enter your serial key as value, which you can retrieve by right clicking on your Mount & Blade Warband on steam or from your buying receipt.

Varadin said:
go to desktop , open start button , go to sreach and type  Regedit. After that enter regedit.exe and find HKEY_CURRENT_USER and go to SOFTWARE and find Mount&Blade : warband  than open Serial key tab and enter serial key.
 
Hatte auch mal das Problem, das die Serverliste sehr klein war.
Gotha hat mir dann den Tipp gegeben, den Router neu zu starten bzw. ein- und auszustecken, was dann auch geholfen hat.
 
Back
Top Bottom