RogueHunter
Squire
I ran the S.M.A.R.T feature on speed fan since it sometimes freezes and some software won't open and what it said about my drive is below,any solution?
Your hard disk is a WDC WD6400BEVT-22A0RT0 with firmware 01.01A01.
The average temperature for this hard disk is 40C (MIN=27C MAX=54C) and yours is 44C.
Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full report about the reliability, health and status of your hard disk is generated:
Your hard disk is not below any attribute threshold. This is good.
Your hard disk was never below any attribute threshold. This is good.
Your hard disk is now being compared to real data used to define normal values for your specific hard disk model. This way, the analysis can automatically use proper operating ranges. The images give you an idea of how each attribute is within such range. Current and raw values are shown for easier reference for experienced users. There are 3001 hard disk models in the current archive.
Attribute Current Raw Overall
Raw Read Error Rate 200 0 Very good
Spin Up Time 185 1750 Very good
Start/Stop Count 83 17974 Good
Reallocated Sector Count 200 0 Very good
Seek Error Rate 100 0 Normal
Power On Hours Count 95 3684 Normal
Spin Retry Count 100 0 Very good
Calibration Retry Count 100 0 Very good
Power Cycle Count 100 742 Very good
Power Off Retract Count 200 68 Very good
Load Cycle Count 75 376515 Normal
Reallocated Event Count 200 0 Very good
Current Pending Sector 199 174 Watch
Warning: Current Pending Sector is below the average limits (200-200).
Offline Uncorrectable Sector Count 100 0 Very good
Ultra DMA CRC Error Rate 200 0 Very good
Write Error Rate 200 0 Very good
NOTE: not all warnings are reflected on fitness and performance overall values as relevancy is based upon the settings from the hard disk manufacturer who is the best entity deputed to define such relationships.
NOTE : your hard disk has 174 pending sectors (this value is very large and your hard disk should be replaced). Those are sectors that couldn't be properly read and that the hard disk logic is waiting for a write operation to try to remap to a spare sector (if available). According to the Reallocated Sector Count attribute, your hard disk seems to have available spare sectors. A simple disk surface scan won't be enough to force the remap operation. You need a read/write surface scan to remap the sector. The best option should be a tool that knows about what should be read from that sector so that it has some option to apply the best fix to the missing data.
The overall fitness for this drive is 61%.
The overall performance for this drive is 90%.
Your hard disk is a WDC WD6400BEVT-22A0RT0 with firmware 01.01A01.
The average temperature for this hard disk is 40C (MIN=27C MAX=54C) and yours is 44C.
Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full report about the reliability, health and status of your hard disk is generated:
Your hard disk is not below any attribute threshold. This is good.
Your hard disk was never below any attribute threshold. This is good.
Your hard disk is now being compared to real data used to define normal values for your specific hard disk model. This way, the analysis can automatically use proper operating ranges. The images give you an idea of how each attribute is within such range. Current and raw values are shown for easier reference for experienced users. There are 3001 hard disk models in the current archive.
Attribute Current Raw Overall
Raw Read Error Rate 200 0 Very good
Spin Up Time 185 1750 Very good
Start/Stop Count 83 17974 Good
Reallocated Sector Count 200 0 Very good
Seek Error Rate 100 0 Normal
Power On Hours Count 95 3684 Normal
Spin Retry Count 100 0 Very good
Calibration Retry Count 100 0 Very good
Power Cycle Count 100 742 Very good
Power Off Retract Count 200 68 Very good
Load Cycle Count 75 376515 Normal
Reallocated Event Count 200 0 Very good
Current Pending Sector 199 174 Watch
Warning: Current Pending Sector is below the average limits (200-200).
Offline Uncorrectable Sector Count 100 0 Very good
Ultra DMA CRC Error Rate 200 0 Very good
Write Error Rate 200 0 Very good
NOTE: not all warnings are reflected on fitness and performance overall values as relevancy is based upon the settings from the hard disk manufacturer who is the best entity deputed to define such relationships.
NOTE : your hard disk has 174 pending sectors (this value is very large and your hard disk should be replaced). Those are sectors that couldn't be properly read and that the hard disk logic is waiting for a write operation to try to remap to a spare sector (if available). According to the Reallocated Sector Count attribute, your hard disk seems to have available spare sectors. A simple disk surface scan won't be enough to force the remap operation. You need a read/write surface scan to remap the sector. The best option should be a tool that knows about what should be read from that sector so that it has some option to apply the best fix to the missing data.
The overall fitness for this drive is 61%.
The overall performance for this drive is 90%.